The warmth of water.
Comfort everywhere.
A variable-capacity heat pump to supply your building’s radiant floors and hydronic equipment.
3 tons.
Power that adapts.
The capacity is chosen from a heat-load calculation, not from floor area alone.
Radiant floors
Warm water flows through a network built into the floor.
Air handling
The unit can be paired with a suitable water-to-air exchanger.
Water preheating
Possible depending on the equipment and the layout.
Hydronic control
Heating calls are managed to match what the building needs.
Performance, dimensions and options must be checked in the model’s own specification sheet. The visual shows the product family.
Just the energy
you need.
The variable-speed compressor adjusts the heat pump’s output to the demand. Comfort stays steadier as the building’s needs change.
The ground loop, the controls and the distribution are sized together, so the system delivers its full efficiency.
From the ground to your home.
A loop in the ground. A water circuit in the house.
The underground loop picks up heat from the ground.
The heat pump transfers that energy to the indoor circuit.
Water feeds the radiant floors to heat the rooms.
Technical specifications.
| Range capacity | 3 tons |
|---|---|
| Nominal equivalent* | 36,000 BTU/h |
| Compressor | Variable speed, inverter |
| Thermal energy source | Ground loop |
| Distribution in the building | Water · hydronic system |
| Functions | Heating; cooling through an air handler |
* Capacity class conversion: 1 ton = 12,000 BTU/h. This is not the unit’s measured output, which varies with operating conditions and must be confirmed in the model’s sheet.
COP/EER performance, power supply, dimensions and installation instructions: see the documents for your unit.
Your project starts here.
Let’s talk about your building and the solution that suits it.